What our customers are saying
Thoughts about our service
What was purchased
READ ANOTHER TESTIMONIAL
See what people are saying about Rattlesnake! Over 2200 testimonials and growing!
Free US / Domestic Shipping On Orders Over $145!
Let's talk about the TRS to Dual Mono Splitter
Depending on the situation, you may need a TRS splitter. A TRS splitter splits a TRS plug's Tip and Ring signal into two independent mono plugs. Often this is purchased as a Y-Cable.
There are a variety of products that do this. Where it's beneficial to have a splitter is with the Rick-O-Sound and the Jerry Garcia style OBEL (On-Board Effects Loop).
Rickenbacker's Rick-O-Sound
On some Rickenbacker instruments, there are two output jacks on the guitar. One labeled "Standard" and the other "Rick-O-Sound." Then Standard accepts a standard 1/4" mono plug, and the Rick-O-Sound accepts a TRS (Tip Ring Sleeve) stereo plug.
When plugged into the Rick-O-Sound TRS output, the pickups are individually wired (Bridge going on one conductor and the Neck to another). Both signals are sent to separate amps or effects. Some musicians look for a Y-Cable, but it can be difficult to find the proper lengths and durability to meet their needs. That’s where the TRS to Dual Mono splitter comes in very handy.
With the TRS to Dual Mono Splitter, you can run a single TRS cable from the instrument to the splitter. You can add a pair of standard mono instrument cables from the splitter. You have the flexibility to change lengths (or switch to patch cables, etc.) at any time or as needs change without having to change the entire setup.
Check out this great video where Dan Hildebrand demonstrates his Rickenbacker set up with Rattlesnake Cables and the Rattlesnake TRS to Dual Mono Splitter: https://www.youtube.com/watch?v=L2veN5iG3uQ
Jerry Garcia OBEL
When Jerry Garcia was playing with the white Travis Bean TB500, he began working with the OBEL option. The OBEL (On-Board Effects Loop) is an effects loop running through the guitar circuitry instead of the signal going from guitar to pedals to amp. With this setup, two cables are required. One cable is a standard mono instrument cable that would go to an amp (or pedals to amp). The second cable is a TRS (Tip Ring Sleeve) Stereo cable acting as send and return of the effects loop (which would be an array of pedals on the ground). In the past, this would need to be a Y-Cable with various lengths. With the TRS to Dual Mono Splitter, a single TRS of any length can be used to go from guitar to splitter. To create the send and return effects loop, the player can use short mono instrument cables or patch cables to and from the splitter to effects pedals on the floor.
With the TRS to Dual Mono Splitter, you have the flexibility to change cables and lengths depending on the application or situation.
The advantage of going with a splitter is that the strain of the ground split is contained in a rugged enclosure and not reliant on the cable. Cable strain can lead to cable failure. I'm sure some of you had Y-Cables fail.
We are very partial to Splitters vs. Y-Cables and offer a variety of splitters such as our Mono to Dual Mono Splitter, Stereo to Dual Stereo Headphone Splitter and our super popular TRS to Dual Mono Splitter. All are passive (no power), simple and built to last!
Below is a listing of our Recent Articles
Fractal Audio Cable Essentials: Humbuster™ Noise Reduction and AM4 Insert Summing
Fractal Audio Cables Explained: Humbuster™ vs AM4 Summing Insert Cables Modern Fractal rigs are capable of astonishing tone, clarity, and flexibility. But even the most advanced processor can be held back by improper cabling. Noise, ground loops, signal loss, and routing limitations almost always trace back to how devices are connected. Two cable types in particular often cause confusion for players running Fractal Audio systems: the Fractal Humbuster™ cable and the Fractal AM4...
Your Rick-O-Sound Not Working?
Here at Rattlesnake Cable Company, we field many calls and emails about the Rickenbacker® Rick-O-Sound feature. Usually, these calls are all related to the Rick-O-Sound (or Ric-O-Sound) functionality not behaving as expected. Over the years, I started to notice a trend in relation to these calls, and wanted to basically create a checklist of reasons why your Rick-O-Sound is not working correctly. Some are obvious, but I'm adding them since I do get calls for this. So here are seven reasons...
Custom Stage Cable Looms
What exactly is a cable loom? What is a Cable Loom? First, we need to address the fact that cable looms are sometimes mentioned with different terminologies. A cable loom is when you have multiple signals wires/cables wrapped in a single weave or 'loom'. Sometimes cable looms are referred to as Cable Snakes, Pedalboard Snake, or Pedalboard Cable Snake. Typically, these are used for Pedalboard Cable Management, from board to amp, but can refer to many other applications, such as IEM, XLR,...
TRS cables vs. TS Cables. What's the difference?
A question this often asked is, “What is the difference between a TRS and a TS cable?” This is a frequent question and has a lot of information associated with it. We wanted to provide some answers to some of the most common questions surrounding this simple yet complex topic. We thought the best approach was to break down the various questions we get since there are several angles to the answer. TRS Cables vs TS Cables The first fundamental to understand is that the underlying cables are...
What is the perfect guitar cable length?
What is the perfect guitar cable length? At Rattlesnake Cable Company, we often get asked, "what is the perfect guitar cable length?" That is a difficult question to answer without knowing some of the critical variables and applications for the musician. But before we get started, let's start with some of the common questions. Are long guitar cables bad? Yes and no. Typically, extremely long guitar cables can be a problem due to cable capacitance. The longer the run, the more capacitance can be...Testimonial Images
Reviews on Google
9/3/2021
Love these cables! From the main leads, to speaker cables, to patch cables. They look just as awesome as they sound!
9/26/2022
The customer service that Hank and his team provides is unparalleled, and the quality of Rattlesnake cables is noticeably top-tier. I also have noticed a better, more full tone than the cables that I had been previously using. I cannot recommend Hank and Rattlesnake highly enough. Thank you Hank;... Read
9/16/2022
We are a Missoula based band that prides itself on doing things right. Our fans expect the best from us and Rattlesnake Cable Company helps us to deliver each and every time with custom made, bullet proof instrument, patch, and speaker cables and the splitters to support them. If you want the best... Read
9/3/2021
Love these cables! From the main leads, to speaker cables, to patch cables. They look just as awesome as they sound!
9/26/2022
The customer service that Hank and his team provides is unparalleled, and the quality of Rattlesnake cables is noticeably top-tier. I also have noticed a better, more full tone than the cables that I had been previously using. I cannot recommend Hank and Rattlesnake highly enough. Thank you Hank; you've got a customer for life in me!
9/16/2022
We are a Missoula based band that prides itself on doing things right. Our fans expect the best from us and Rattlesnake Cable Company helps us to deliver each and every time with custom made, bullet proof instrument, patch, and speaker cables and the splitters to support them. If you want the best cables that money can buy at a price point that won’t eat your budget then you really need to call the gents at RCC.
