Red Retro Coily Cable Blow Out!

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Dan in Springfield, VA recently purchased a custom loom!
Michael in West New York , NJ recently purchased a custom loom!
Joel in Holt, MO recently purchased a custom loom!
James in Bayside, NY recently purchased a custom loom!
Bryan in Indianapolis, IN recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.
Identification:

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box

Junction Box Option Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

I recently made my first purchase from Rattlesnake Cables and want to get the word out there about these guys. First off and most importantly, the loom they made me to combine my signal cable and effects loop cables to create a single run from pedal board to my amp came out fantastic. It works perfectly, looks cool as can be, streamlines my footprint on stage, and just as important, gives me the peace of mind in that I have confidence that I'm not going to have any cable failing on me before or during a gig. Beyond the cable loom itself, these guys were great to work with. Super responsive and gave me the time and attention to design the thing for me and make sure that I'd thought of everything to consider before putting the order in… That kind of service is hard to find these days. Lastly, I've never been actually excited waiting for and to getting in an accessory for my rig before. I mean essentially we're just talking cables here right? Lol… But seriously, this thing is cool.

Service / Experience

Customer service was top notch. These guys made sure we'd thought of everything when designing the cable run. Not in the way of upselling at all either, just particulars to make sure this purchase was dead on what I need.

Items Purchased

25 Foot 3 cable loom for pedal board to amp.

- David B - 12/09/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

Mark Beem
9/8/2020
The best cables I've ever used in my 35+ years playing live and in studio. Rugged, durable and no high-end loss. I can't recommend them enough. If you're serious about the music you play, these are the cables for you.

Jack Kadien
5/21/2021
My favorite cable company. I've ordered so much stuff from them over the past few years that I'm practically on a first name basis with them. All their stuff is amazing. Everything is custom made (cable length, plug configuration, cable color, type of cable, etc.). Having it custom made makes it much more fun to order something from them, because there are few things that make a musician feel more awesome than having gear thats made unique to them. Everything I've ordered from them sounds great. All of their stuff has a life time warranty, which is awesome. If they don't have anything readily advertised on their website, if you ask them they can make it for you (I recently ordered a custom 3 foot patch cable). Their shipping is extremely fast. I never had loyalty to any cable company until I discovered Rattlesnake Cable Company. I won't buy cables from anyone else.

Brian Grilli
4/22/2023
Hank not only provides the best cables but also the best customer service! I was floored when I got my first snake head cable. I put it against my Conquest, Lava, Spectraflex and Mogami cables and it's such low capacitance that it brought more sparkle back into my signal. I've now added two more instrument cables and did my pedalboard with all Rattlesnake patch cables. The build quality is top notch and sound is superior to any other cable out there! Superhuman quick shipping, friendly and quick responses to emails and orders! I purchased 2 snake head instrument 15' & 20'. 1 standard cable 20' and a 6 pack of 6in patch and a 10 pack of multi-length patch cables.

Videos.

Check out some videos talking about Rattlesnake Cables - unboxing, demos, etc.