Free US / Domestic Shipping On Orders Over $135!

How to find the best guitar cable.

When looking for the best guitar cable, there are many questions to ask. But typically, people first tend to ask, "what is the best guitar cable." And from this point, they get lost in the options, pricing, and specifications.

I wanted to do a breakdown of these areas to help the understanding of features and specifications and what they mean for you. So let's ask a few common questions.

What makes a good guitar cable?

How to find the best guitar cable. Cables laying cable reels Conductor gauge or AWG or American Wire Gauge. This is what carries your signal from your instrument to the next point of your signal chain. When we talk about cables' pricing, we're generally talking about the copper in the cable. The more copper and the better quality of copper can raise the price. A great gauge for the primary signal conductor is 20 AWG. By having a thicker conductor, you increase the strength of that signal path. Over time, the cable bending and twisted can cause a thinner gauge to break from fatigue.

Oxygen Free Bare Copper or OFBC is a smelting process of the copper (electrolytically refined). This smelting leads to extremely high-quality copper. The higher quality copper will increase conductivity, and we all want that. Conductivity is the reason we hear our instrument. Again, like our conductor gauge, the OFBC will often bring in a larger price point compared to Bare Copper or BC.

Capacitance. You'll run into this term a lot. Capacitance, or guitar cable capacitance, is when your signal degrades. This degradation is based on the diameter of the cable in relation to the conductor and length of the cable. Okay, that isn't very easy. Let me explain it this way. There is a copper "shield" protecting the inner conductor. I'll get into guitar cable shielding next, but the closer the conductor is to the shield, the higher capacitance. The higher capacitance will result in a muddy or darker tone and potential volume loss. Capacitance is also related to the length of the cable. The longer the cable, the higher the capacitance.

A good guitar cable will want to have the perfect amount of capacitance in the desired length. For example, our Standard instrument cables are 20-25pF (picofarad) / foot. This is tested at 15' feet lengths. A 10' cable is probably 19-21pF, while a 20' cable is in the 22-27pF range. As we get longer, the pF increases.

Thin cables will either have tiny conductor or have higher capacitance. Our instrument cable is thick (.280" diameter) to maintain a strong conductor and have low capacitance.

Shielding. We touched on this above. Shielding is critical for a quality instrument cable. Shielding (or ground) is to "shield" the conductor from outside radio frequencies (RF). External signals are flying about in the air. A cable without a shield is an antenna and would pick up the radio or other frequencies. Shielding will pick up those frequencies and send them to ground. Quality shielding ensures a quiet cable.

Cables come with two types of shielding - spiral shielding and braided shielding. Spiral shielding allows for more flexibility, but gaps in the shielding and breakage are possible. Braided shielding is the strongest shielding but can be stiffer. When we talk about shielding, you need to pay attention to "coverage." Cheap cables will have very little coverage. Like the conductor, less copper in the shielding leads to cheaper production costs. You pay the price with noise.

Plugs. What terminates your guitar cable is important. Plugs are where most failures happen. Strain relief plugs or plugs with proper cable clamps like the Neutrik Pro Series we use are the best. Cable clamps are like Chinese finger cuffs. The clamp tightens harder when you pull the plug from the cable. This cable clamp ensures a good "bite" to protect the solder connections.

If you go with Gold or Nickel contacts is up to you. Many people swear by gold, but it doesn't matter unless all contacts are gold in the chain. Gold is very cosmetically appealing, and that's fine.

Does guitar cable quality matter?

This is a funny question that I've heard many times. When you're on stage, and the signal stops, or you're dealing with noise - ask yourself this question. Usually, I get a nod when I say this - quality matters when you have a problem. You can get away with a cheap cable - but if you want the best tone in the recording studio. Or if you want something you can count on while on the road. Yes, quality matters. If you're looking for the best guitar to amp cable, look no further!

Are all guitar cables the same?

Okay, so we talked about what makes a great guitar cable. If we start looking at nuts and bolts and compare specs. If cables are the same from builder to builder, are they the same?

I say "no". At this point we should be looking at the business. There are x-factors when purchasing. The unknowns. For example - buyer experience, customer service, company ideology, etc. Why do we like to buy from certain companies and not others?

When we talk about boutique instrument cables or custom cables, we want to feel good about buying. Where is the wire milled? For instance - here at Rattlesnake Cable Company, we go WAY out of our way to get our cabled milled in the US. Some companies outsource work. Again, family business like ours hires locally to build a team to build your cables. Customer service is critical. Look up reviews and see how company treat their customers AFTER buying. How did they handle complaints? How did they handle repairs, etc.

So when we talk about cable specs, if they are the same, this is what separates the brands.

Below is a listing of our Recent Articles

Your Rick-O-Sound Not Working?

Here at Rattlesnake Cable Company, we field many calls and emails about the Rickenbacker® Rick-O-Sound feature. Usually, these calls are all related to the Rick-O-Sound (or Ric-O-Sound) functionality not behaving as expected. Over the years, I started to notice a trend in relation to these calls, and wanted to basically create a checklist of reasons why your Rick-O-Sound is not working correctly. Some are obvious, but I'm adding them since I do get calls for this. So here are seven reasons...

Read

Custom Stage Cable Looms

What exactly is a cable loom? What is a Cable Loom? First, we need to address the fact that cable looms are sometimes mentioned with different terminologies. A cable loom is when you have multiple signals wires/cables wrapped in a single weave or 'loom'. Sometimes cable looms are referred to as Cable Snakes, Pedalboard Snake, or Pedalboard Cable Snake. Typically, these are used for Pedalboard Cable Management, from board to amp, but can refer to many other applications, such as IEM, XLR,...

Read

TRS cables vs. TS Cables. What's the difference?

A question this often asked is, “What is the difference between a TRS and a TS cable?” This is a frequent question and has a lot of information associated with it. We wanted to provide some answers to some of the most common questions surrounding this simple yet complex topic. We thought the best approach was to break down the various questions we get since there are several angles to the answer. TRS Cables vs TS Cables The first fundamental to understand is that the underlying cables are...

Read

What is the perfect guitar cable length?

What is the perfect guitar cable length? At Rattlesnake Cable Company, we often get asked, "what is the perfect guitar cable length?" That is a difficult question to answer without knowing some of the critical variables and applications for the musician. But before we get started, let's start with some of the common questions. Are long guitar cables bad? Yes and no. Typically, extremely long guitar cables can be a problem due to cable capacitance. The longer the run, the more capacitance can be...

Read

What Is Rick-O-Sound? And what do you need?

What is the Rickenbacker® Rick-o-Sound (Ricko sound)? On the Deluxe Rickenbacker® models, they introduced the Rick-O-Sound circuit in their instruments. The Rick-O-Sound separates the two pick-ups (bridge and neck) into separate, independent lines that require a TRS (aka Balanced or Stereo) cable. You can then use these individual lines and send them to specific amps, pedal setups, etc., via our TRS to Dual Mono Splitter. This split signal handling is managed via a separate output jack...

Read

Reviews on Google

Aaron Bartz
3/26/2021
Frustrated with low quality cables, I was suggested Rattlesnake by my brother, and wow, this is a great cable. Before I even plugged it in, the quality was apparent. The weaving is awesome, and I'm not at all concerned the plug will start to separate from the cable (probably my main issue with other cables). Plus, with the Snake Head, I have total peace of mind that my guitar's finish is safe from any possible, what I call, "cable rash" abrasion. Top notch customer service from my first visit to the website, through the unboxing of my new cable. I was able to chat on the website to instantly learn more and decide which cable was right for me. The founder, Hank, sent a personal "thank you" video, which was greatly appreciated, and the free swag items in the package were a cool touch.

james Munday
5/27/2022
I've been playing guitar since 1972. During all the years I've tried every string on the market. Over the years I've used some really good sounding strings but once I tried Stringjoys I was hooked. Not sure how many sets of SJ's I've put on my Telecasters and also my Taylor acoustic but they are for real. I've found SJ's to be long lasting, smooth as ice, and subtle but really clean. Love them and that's all I buy now. I'm fortunate to have tried them. Time to order more I think. If you play guitar you should try them. SJ's my string. RM

Kedi
1/19/2021
GET A RATTLESNAKE! THEY DON’T BITE! After years of getting what I considered some of the best guitars and amps I realized that what I had in the way of cables was, well basically junk. Luckily I discovered Rattlesnake Cables. In addition to being a visual treat, colors and patterns, the great “snakehead “ concept to protect your guitar finish, the cables provided a solid, stable connection. Gone were the snaps and crackles of thin, poorly soldered connections and loose jacks. Acoustic, electric, tube amp and solid state all sounded better to me and provided confidence in my equipment. I replace my head to cab cable with a Rattlesnake cable made specifically for that application, again no more concerns about connections. I am working on replacing pedalboard jumpers with Rattlesnake connections. Multiple lengths available to solve board design issues. These folks are nice to work with. Packaging is well though out, a nice cable tie include, a cable bag and cool sticker. The hand written thank you note on a small pad, to me, exemplifies their commitment to customer service. It’s a small American company that does things right. Cool T-shirts too!

Jordan in Peekskill NY just made a purchase!
about 5 hours ago

Mauricio in Hollywood FL just submitted a custom loom request!
about 7 hours ago

Miguel in Seattle WA just made a purchase!
about 52 minutes ago

Jay in Arlington WA just submitted a custom loom request!
about 5 hours ago

Delano in Artesia NM just made a purchase!
about 16 hours ago

John in 00 just submitted a custom loom request!
about 31 minutes ago

Mike in Monroe WA just submitted a custom loom request!
about 2 hours ago

Luis in Medellin ANT just submitted a custom loom request!
about 4 hours ago

Matthew in Andover MA just made a purchase!
about 5 hours ago

Basil in Pelzer SC just submitted a custom loom request!
about 8 hours ago

How to find the best guitar cable.

What makes a good guitar cable?

Does guitar cable quality matter?

Are all guitar cables the same?

Related Products mentioned in this article...

Pedal Steel Cable

Standard Rattlesnake Cable

Snake Head Rattlesnake Cable