What our customers are saying
Thoughts about our service
What was purchased
READ ANOTHER TESTIMONIAL
See what people are saying about Rattlesnake! Over 2200 testimonials and growing!
Free US / Domestic Shipping On Orders Over $145!
What is the perfect guitar cable length?
What is the perfect guitar cable length?
At Rattlesnake Cable Company, we often get asked, "what is the perfect guitar cable length?" That is a difficult question to answer without knowing some of the critical variables and applications for the musician. But before we get started, let's start with some of the common questions.
Are long guitar cables bad?
Yes and no. Typically, extremely long guitar cables can be a problem due to cable capacitance. The longer the run, the more capacitance can be encountered. Cable capacitance will darken or muddy your tone. The rate of that capacitance has multiple factors, including the length of the cable, the gauge of the conductor, and the how much internal insulation separates the signal conductor from the shield.
Long cables can be remedied with a signal buffer to get that original signal back. So if a long cable is required, we recommend using a buffer somewhere in the signal chain.
Does guitar cable affect the sound?
Absolutely, the guitar cable can affect the sound. As I mentioned above, capacitance can be an issue. This is highly dependent on the cables you purchase and how they are built. Shorter run cables in the 10-15 feet range are ideal and going 20 feet and longer, you may begin to experience some tone or signal loss. Our cables are engineered to be low capacitance, with the sweet spot being in that 15' range, and 20' still sounds clear and natural.
Are thicker guitar cables better?
Thicker guitar cables tend to indicate durability (beefy, as they say). But thicker cables also mean a more significant gap between the signal conductor and the internal shield. This gap is critical for maintaining lower capacitance over distance. Thinner cables will have a smaller gap, and high-end frequencies will bleed to ground with shorter lengths. The only way to compensate for that is to go with a thinner signal conductor, resulting in breakage over time. Our cable uses a 20AWG center conductor and spacing for low capacitance 20-25pF/foot at 15-foot length.
Now that we have some of the basics of how length can affect your tone and overall signal, let's talk about length requirements for performing.
Guitar cable length for gigs.
There are a couple of rules of thumb here.- What is the size of the stage?
- What is the required movement needed?
If you're performing on a large stage with your rig WAY behind you, you need longer cables. Gigging musicians often carry a short set and a large set for the run between the pedalboard and amp. I usually recommend having an Instrument Junction Box to tie cables together for super long runs. If you're playing in most ‘bar' stages and don't want to be standing on your cables, then I would recommend 10' cables.
The other factor, which can be a significant issue, is where your beverage is during a performance. If you put a drink on your amp, you must ensure your primary instrument cable can return to the pint glass or can. If you use a mic stand to hold your beverage or keep it by your feet, then it's not an issue.
Movement is something to consider as well. Do you stay in your zone? Do you wander around? If so, then a large cable might be required.
For a typical to average stage, I would recommend a 15' to 20' Standard Cable from pedalboard to amp and a 10' or 15' Snake Head or Standard from board to instrument. If you encounter a large stage, I would recommend carrying a 20' Standard as emergency bonus cable and a Junction Box to double your length from pedalboard to amp.
Guitar cable length for recording.
When recording, you are very much in control of your tone, playing area, etc. Length is generally not an issue unless isolation booths are a long way from the playing area. If so, you can dial the proper tone while sound checking and compensating for cable capacitance with the amp or at the console. Starting with the best-desired tone is the way to go, so finding that perfect length for your ear is ideal but not necessary. Also, the opposite can be helpful; in some cases, you may think your tone is too bright, and an extremely long cable might help with that. That is one of the reasons some players like coiled cables to get that added cable capacitance with guitars with exaggerated highs.
In summary, what is ideal cable length for guitar?
Essentially, where it matters the most is live settings. Understand your average stage size and account for that, with backups lengths and the ability to lengthen if needed. Understand how you navigate your playing area (i.e., grabbing drinks, interacting with your band, etc.). Typically, 10-15 foot length cables are ideal for most stages and ensure excellent tone. Anything over 20 feet might require some adjustments.
Below is a listing of our Recent Articles
Fractal Audio Cable Essentials: Humbuster™ Noise Reduction and AM4 Insert Summing
Fractal Audio Cables Explained: Humbuster™ vs AM4 Summing Insert Cables Modern Fractal rigs are capable of astonishing tone, clarity, and flexibility. But even the most advanced processor can be held back by improper cabling. Noise, ground loops, signal loss, and routing limitations almost always trace back to how devices are connected. Two cable types in particular often cause confusion for players running Fractal Audio systems: the Fractal Humbuster™ cable and the Fractal AM4...
Your Rick-O-Sound Not Working?
Here at Rattlesnake Cable Company, we field many calls and emails about the Rickenbacker® Rick-O-Sound feature. Usually, these calls are all related to the Rick-O-Sound (or Ric-O-Sound) functionality not behaving as expected. Over the years, I started to notice a trend in relation to these calls, and wanted to basically create a checklist of reasons why your Rick-O-Sound is not working correctly. Some are obvious, but I'm adding them since I do get calls for this. So here are seven reasons...
Custom Stage Cable Looms
What exactly is a cable loom? What is a Cable Loom? First, we need to address the fact that cable looms are sometimes mentioned with different terminologies. A cable loom is when you have multiple signals wires/cables wrapped in a single weave or 'loom'. Sometimes cable looms are referred to as Cable Snakes, Pedalboard Snake, or Pedalboard Cable Snake. Typically, these are used for Pedalboard Cable Management, from board to amp, but can refer to many other applications, such as IEM, XLR,...
TRS cables vs. TS Cables. What's the difference?
A question this often asked is, “What is the difference between a TRS and a TS cable?” This is a frequent question and has a lot of information associated with it. We wanted to provide some answers to some of the most common questions surrounding this simple yet complex topic. We thought the best approach was to break down the various questions we get since there are several angles to the answer. TRS Cables vs TS Cables The first fundamental to understand is that the underlying cables are...
What Is Rick-O-Sound? And what do you need?
What is the Rickenbacker® Rick-o-Sound (Ricko sound)? On the Deluxe Rickenbacker® models, they introduced the Rick-O-Sound circuit in their instruments. The Rick-O-Sound separates the two pick-ups (bridge and neck) into separate, independent lines that require a TRS (aka Balanced or Stereo) cable. You can then use these individual lines and send them to specific amps, pedal setups, etc., via our TRS to Dual Mono Splitter. This split signal handling is managed via a separate output jack...Testimonial Images
Reviews on Google
11/16/2025
I can’t say enough good things about these cables. They look awesome. They sound awesome. Most importantly is the customer service. In a world that hides behind the Internet they’re very personable. Answer your questions on time and are not afraid to speak to you on the phone. We are customers... Read
9/7/2020
Rattlesnake Cable Company is a premiere example of excellence in product quality and business. If you were to ask me what brands best represent the audio industry from here in Montana, Rattlesnake Cable Company would be one of the first to mind. Rattlesnake Cables define cable quality. Prior to... Read
3/2/2025
Excellent cables and accessories! They are very well-made and should last a very long time. I liked them so much, I have since ordered more cables from them. The personal touches and updates to shipping status are also greatly appreciated. Overall shipping time was less than a week and everything... Read
11/16/2025
I can’t say enough good things about these cables. They look awesome. They sound awesome. Most importantly is the customer service. In a world that hides behind the Internet they’re very personable. Answer your questions on time and are not afraid to speak to you on the phone. We are customers for life.
9/7/2020
Rattlesnake Cable Company is a premiere example of excellence in product quality and business. If you were to ask me what brands best represent the audio industry from here in Montana, Rattlesnake Cable Company would be one of the first to mind. Rattlesnake Cables define cable quality. Prior to using them, the difference between "any old cable" and a "nice" cable was negligible to me, but now I cannot go back to just "any old cable." Rattlesnake cables will hold their own in audio quality, durability, AND asthetic when compared side by side with any high end cable on the market.
3/2/2025
Excellent cables and accessories! They are very well-made and should last a very long time. I liked them so much, I have since ordered more cables from them. The personal touches and updates to shipping status are also greatly appreciated. Overall shipping time was less than a week and everything was well-packed and arrived safely. I highly recommend this company!
