Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Gordon in Logan, UT recently purchased a custom loom about 16 hours ago
Thomas in Spartanburg, SC recently purchased a custom loom about 20 hours ago
Trevor in Dripping Springs, TX recently purchased a custom loom about 23 hours ago
Dale in Eagle, ID recently purchased a custom loom about 24 hours ago
Jeff in MARGATE CITY, NJ recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

To say that I was blown away is an understatement. Everything from the packaging to what comes in the box and the quality of the product is above my expectations. I will be ordering all of my cables from Rattlesnake Cable Company from here on out.

Service / Experience

Customer service was stellar. I sent a quote for a custom piece and Hank called me and asked a few questions and within minutes I had a diagram and a quote emailed to me and he made it super easy to get what I needed.

Items Purchased

I purchased a 20 foot loom with a send, return, and amp to run from a pedalboard to my amp and the effects loop

- Will C - 07/31/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

David Buck
6/23/2023
Great, strong, overbuilt, beautiful guitar cables. The snakehead model has a soft length close to the instrument so as not to damage the finish. Service and shipping are top tier and the best experience to purchase from Hank and the team. Pricey, but worth it.

Mike Levy
5/28/2022
These seem like the last cables I will every buy. I bought one to check out then immediately bought 3 more. I'm a gigging player, about 4-5 times a week, as well as running a studio. I need cables that I can count on and these are them. I'm not worried about accidentally sitting a chair leg on one and having it give out. The ends are put together really well. These seem like great people making great cables. I've already started telling all of my friends about them!

Jason Graves
8/5/2021
I first heard about Rattlesnake cables through an acoustic Facebook group I'm in. I needed a couple of cables so I decided to check them out. I liked the products I saw, and many of the folks in the group had good things to say about the company, so I jumped on two 15' standard cables. I looked over the website and saw that they're a small company, and just figured I'd hear from them in about a week or so. To my huge surprise, that evening I got an email from Hank at Rattlesnake who said he was beginning on my order. The next morning, I got a very nice VIDEO message from Hank thanking me for the order, and saying it was shipping THAT DAY. Wow! It arrived within a few days, and was perfect for my needs. The cables are solidly built and I expect I'll get many years of good use from them. I liked them so much I even bought another - and had the same fantastic experience with the purchase... quick response, and fast delivery to my home. Thank you, Rattlesnake Cables! I will most definitely be returning!