Save 20% during our Memorial Day Sale

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

John in New Iberia, LA recently purchased a custom loom about 3 hours ago
Eric in Ault, CO recently purchased a custom loom!
James in Huntington Beach, CA recently purchased a custom loom!
Jared in Swisher, IA recently purchased a custom loom!
Michael in San Antonio, TX recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.
Identification:

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box

Junction Box Option Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

Fantastic purchase experience! I purchased a 20' pedalboard snake cable, my old snake cable was broken in the middle and I wanted something heavy duty and this cable is that!

Service / Experience

Excellent!

Items Purchased

I purchased a 20' pedalboard snake cable

- Mitch W - 08/27/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

jason sandstrom
11/10/2022
Amazing service! Very fast and uniquely personal. The patch cable, TRS cable, and TRS splitter I purchased are also fantastic. I will definitely come back for more gear as I need it.

erica strout
10/30/2020
These are the best cables I’ve used, and I love love love the color options! Mine have been going strong for 3 years of touring and no sign of them wearing out or breaking. Thank you!!

TBG25
6/26/2021
I was cruising the internet for a new bass cable and some better patch cables for my board. I came across Rattlesnake Cable Co. Not only did they have a cool name but after a little research it appeared as though they make great cables as well! So, I ordered some . Rattlesnake received the order , filled it and sent them out the same day. Hank , the owner sent a really cool video to let me know everything was on the way and to say thanks for the order . That is amazing customer service ! I was able to order a great looking snake color sleeve and the gold ends of my choice for my bass cable. The cable I ordered also included the Snake Head on the bass end . This has turned out to be my favorite part of the cable . It works amazing ! The board cables sound great as well and are the same quality as the instrument cable . Everything is built great and works wonderfully ! Overall a great purchase, with some great little extras in the box that truly made it an " Old school customer service " feel. Hank seems like a great guy and sent me a great cable ! What else can ya say. I will be upgrading all my cables with Rattlesnake!

Videos.

Check out some videos talking about Rattlesnake Cables - unboxing, demos, etc.