Save 20% during our May the Fourth Sale
DAYS 0
:
HRS 0
:
MINS 0
:
SECS 0
For a very limited time!
Free US / Domestic Shipping On Orders Over $145!
Rattlesnake Cable Company - Custom Cable Loom Header


Custom Cable Loom.

  • verified purchase for cable bundle Reggie in Cheyenne, WY recently purchased a custom loom about 16 hours ago
  • verified purchase for cable bundle Michael in E Amherst, NY recently purchased a custom loom about 16 hours ago
  • verified purchase for cable bundle Michael in Marlboro Township, NJ recently purchased a custom loom!
  • verified purchase for cable bundle Shawn in Saint Petersburg , FL recently purchased a custom loom!
  • verified purchase for cable bundle Rick in Isanti , MN recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.


Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.


How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Loom Cable



Cable Loom Build Request Form

Your Name
Email
Phone
How many cables in the loom?
How long are the cables?
Plug configurations? Straight to Straight? Straight to Right Angle?
Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?
Breakout points? Inches of exposed cable. Note: Minimum is 12"
Loom Color - Black, Snake Weave, and Red are always in stock.
How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.
Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Junction Box Option
Additional notes about this build?


What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.


As a drummer, I've never really put much thought into the cables that I use. I do all of my recording from home, and have an electronics rig that I use for my live shows, but I just lived with cheapo cables that you can purchase online. My guitarist told me to check out Rattlesnake and pick up some cables to upgrade my setup... and I am so happy that I did. These cables are built with love and the quality is absolutely top notch. I am eager to get back on stage and try out my new cables because the setup should be WAY faster now.
Service / Experience
The customer service was PHENOMENAL. Hank called me directly to discuss the Cable Loom that I ordered to make sure it was exactly what I needed. There are not many companies out there that put this much effort into their service.
Items Purchased
XLR Cables, Patch Cables, Instrument Cables, Custom Cable Loom
   - John D - 04/05/2026
Loom Example

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

Loom Example
Loom Example

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

Loom Example
Loom Example

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

Loom Example
Loom Example

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Loom Example




Testimonial Images

  • Testimonial Image
  • Testimonial Image
  • Testimonial Image
  • Testimonial Image
  • Testimonial Image
  • Testimonial Image
  • Testimonial Image
  • Testimonial Image

Reviews on Google

Bob Brown
Bob Brown
6/3/2024
Might be the best cables my band has used. Company does a great job and makes custom cables for us. If you have not used a Rattlesnake cable you are missing out. Don’t waste your money on the box brand cables you will thank me later ????
Stephen Shields
Stephen Shields
7/9/2021
Awesome company! Great products! Responsive with fast delivery!
guitar guy
guitar guy
9/29/2025
Outstanding audio cable company ! Hank set out to be the best and i believe he has succeeded. Look no further for your standard or custom orders. 10 / 10
Bob Brown
Bob Brown
6/3/2024
Might be the best cables my band has used. Company does a great job and makes custom cables for us. If you have not used a Rattlesnake cable you are missing out. Don’t waste your money on the box brand cables you will thank me later ????
Stephen Shields
Stephen Shields
7/9/2021
Awesome company! Great products! Responsive with fast delivery!
guitar guy
guitar guy
9/29/2025
Outstanding audio cable company ! Hank set out to be the best and i believe he has succeeded. Look no further for your standard or custom orders. 10 / 10


Videos.

Check out some videos talking about Rattlesnake Cables - unboxing, demos, etc.

  • Rattlesnake Flex Patch Cables Unboxing - Shawn Hatfield
  • Sean Pierce Johnson
  • Roger Limoges
  • Rattlesnake Cables...so far [w. Ice]
  • Don Crum - Unboxing
  • Pedals Fusion

Search

Fomo

Benjamin in Raleigh NC just made a purchase!
about 19 hours ago

Fomo

Bradley in West Hollywood CA just made a purchase!
about 17 hours ago

Fomo

Seth in Pinellas Park FL just made a purchase!
about 18 hours ago

Fomo

Craig in Ocean City MD just submitted a custom loom request!
about 12 hours ago

Fomo

Josiah in Sykesville MD just made a purchase!
about 13 hours ago

Fomo

Reggie in Cheyenne WY just made a purchase!
about 16 hours ago

Fomo

William in Jacksonville Beach FL just made a purchase!
about 54 minutes ago

Fomo

Ethan in Seattle WA just made a purchase!
about 7 hours ago

Fomo

Dave in Saint Charles IL just made a purchase!
about 14 hours ago

Fomo

Rick in Purcell OK just made a purchase!
about 5 hours ago

Enter Code