Free US / Domestic Shipping On Orders Over $135!

🎁 Are you looking to purchase a gift for a musician? Click here to start! 🎁 🎁 Gift for a Musician? Click Here! 🎁

Custom Cable Loom.

Robert in Amherst, MA recently purchased a custom loom about 1 hour ago
Danny in Sachse, TX recently purchased a custom loom about 2 hours ago
Armando in Tampa, FL recently purchased a custom loom about 2 hours ago
Ashley in Tompkinsville, KY recently purchased a custom loom about 4 hours ago
Michael in Lake Arrowhead , CA recently purchased a custom loom about 20 hours ago

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

Wow! Just Wow. Don't think I've ever encountered this level of customer service. Hanks contacted me immediately after I placed my order to discuss the details. A conversation that helped me avoid a few mistakes! Then with a couple of days, my custom cablesnake arrived and with very nice packaging and product presentation. To top it all off, Hank sent me a personal video thank you to thank me for my business. I'm super impressed!

Service / Experience

Amazing! see details above!

Items Purchased

Cable snake and junction box

- John M - 09/29/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

David Buck
6/23/2023
Great, strong, overbuilt, beautiful guitar cables. The snakehead model has a soft length close to the instrument so as not to damage the finish. Service and shipping are top tier and the best experience to purchase from Hank and the team. Pricey, but worth it.

Dave Molter Music
7/11/2024
I've been playing for almost 60 years and Rattlesnake Cables are by far the best I've used. Service is quick and construction quality is superb. And how can you beat a lifetime warranty? Hank adds a personal touch that is missing in too many manufacturers of music equipment these days. Highly... Read

Richard Henrickson
10/21/2023
I was introduced to Rattlesnake Cables at South Shore Guitar Boutique on Long Island over the summer of 2023. The owners assured me that Rattlesnakes are the finest cables on the market, and that customers had been utilizing them to sample guitars and amps since they'd opened without having to replace a single cable. I purchased two that would compliment a new-build Jazzmaster and original Bartel Tone King Imperial (15' Copper and 20' Retro) and was instantly hooked. The look, feel, and most importantly SOUND that the cables provide is second-to-none: Clear while not antiseptic; full while not flowery; present but not pouty. Now armed with the gigging rig, I ordered a separate set for home practice directly from Rattlesnake. Hank answered all of my queries immediately and sent an amazing, personalized "Thank you" video. When the cables arrived, I was knocked back by Amy's immaculate packaging, which included very cool, sturdy pouches for each of the three cables I'd ordered (an additional Retro, an Oxblood for my current Jazzmaster, and a short Dirty Tweed for my vintage tweed Blues Junior - an amazing find via my longtime pal Matt Brewster at 30th St. Guitars in NYC). The undeniable quality and obvious pride Hank and Co. have for their products has earned in me a lifelong customer. Anyone who cares about durability and approachable service personnel can rest easy that Rattlesnake Cable Company exists, ready to boost your gear with the most reliable, sonically ambitious tone it deserves. Thank you a million times over Hank, Amy, and everyone else at Rattlesnake!