A nice sale on our Purple Weave Cables!

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Ben in Stokesdale, NC recently purchased a custom loom!
Jeff in Fort Collins, CO recently purchased a custom loom!
Abel in Marthasville, MO recently purchased a custom loom!
Gordon in Logan, UT recently purchased a custom loom!
Thomas in Spartanburg, SC recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

Great experience, quick and prompt response to me initial inquiry on a custom loom. Hank called me and talked me through the process and made me think about a few things that changed how I would configure my order. For example , giving myself enough reach so that the cable that plugs into the front of the amp head can get around with no issues, when I did my initial thinking was just focused on the send and return, I would have had to cut my new loom open due to an obvious oversight. So beyond doing business, there is a lot of knowledge to be leveraged. The looms themselves are VERY well made, with attention to detail, just quality stuff. It will look much better in my music room. While it's still 6 cables , the looms really tidy everything up with one loom to each of my two amps going completely around the perimeter of my room. No photos yet, but I'll repost with my looms going to my Friedman Jose and Dirty Shirley connecting to a Two Notes Reload II attenuator. Also got color matching speaker cables for connecting other rack gear. Whether your buying for looks or toughness, it's very nice to get both without having to compromise. Already a repeat customer….

Service / Experience

A++ easy to talk to. Worlds of knowledge. Kept me from making a dumb mistake!

Items Purchased

Two 40 foot custom 3 cables looms for Amp, Send and Return (nicely labeled too…) Two 3 foot 12 gauge speaker cables (patching between rack units) I already had the speaker cable or would have made ithem a 4 cable loom to include the speaker cable too, you definitely want that 12 gauge.

- Armando R - 10/11/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

guitar guy
9/29/2025
Outstanding audio cable company ! Hank set out to be the best and i believe he has succeeded. Look no further for your standard or custom orders. 10 / 10

Eric Sherman
3/23/2025
Great cables, great service, fast shipping, great people, great pricing. What's not to like? My first custom order was perfect and so fast, I made a second order a week later.

Aaron Tanner
8/15/2023
I've played guitar for over 20 years, and I've never given my cables much thought. However, I recently started seeing ads for Rattlesnake Cable Company, and I like their look and the fact that they are American made, so I decided to give them a shot. And man am I glad I did! First, the shipping was fast, and the packaging was pretty cool as each cable comes in it's own cloth sack. Second, the quality, look, and sturdiness of the cables were were leaps and bounds above what I was use to. Finally, and most importantly, when I A/B-ed them against my normal cables I was blown away by the improved tone. It was like somebody took a blanket off of my amp! I definitely recommend these cables to any guitarist who is serious about quality and tone.

guitar guy
9/29/2025
Outstanding audio cable company ! Hank set out to be the best and i believe he has succeeded. Look no further for your standard or custom orders. 10 / 10

Eric Sherman
3/23/2025
Great cables, great service, fast shipping, great people, great pricing. What's not to like? My first custom order was perfect and so fast, I made a second order a week later.