Save 20% during our Memorial Day Sale

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

John in New Iberia, LA recently purchased a custom loom about 2 hours ago
Eric in Ault, CO recently purchased a custom loom!
James in Huntington Beach, CA recently purchased a custom loom!
Jared in Swisher, IA recently purchased a custom loom!
Michael in San Antonio, TX recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.
Identification:

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box

Junction Box Option Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

Looking for ease of quicker set up at gigs and a quality product. Filled out an order online and was contacted by the owner verifying what I had chosen. Talked him through my personal situation and what I was looking and he was extremely helpful and personally recommended alterations to my order that was very helpful. Haven't played out with this yet , only rehearsed, but I am thoroughly pleased with Rattlesnake and will be communicating with them again in the near future.

Service / Experience

Thoroughly satisfied and would highly recommend !

Items Purchased

Three cable 27 ' loom , black .

- Todd M - 05/05/2026

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

Lonnie Zamarripa
10/24/2020
I have purchased instrument cables , a pick tin and also a speakon cable from Rattlesnake Cables. I highly recommend these people and their product. I love the unique way each item is packaged and the care they take to ensure that I am satisfied to the nth degree. Can’t go wrong here!

Rusty Coleman
12/19/2022
I was looking for a cable to match my new Fender Stratocaster. I found the tangerine cable from Rattlesnake... chose my connections, the produced it asap, shipped it... and it is GREAT! These are high quality cables. Get them!

Jim Lockwood
7/1/2022
I have purchased many cables over the last 30 years of playing. Rattlesnake cables are the absolute best that I've come across. IFrom patch cables to speaker cables to instrument cables: they are all top notch! All my bandmates are now hooked on them as well. We all love that they come in different colors so we know who's cables are who's at the end of the night when wrapping up after a gig. One band member said that he's tried many different brands of cables, but his Rattlesnake cables are the only ones that don't create a hum with his instrument. Being in a band in northwest Montana, we also all appreciate that we are supporting a Montana business! Cheers to Rattlesnake! Keep up the great work!

Videos.

Check out some videos talking about Rattlesnake Cables - unboxing, demos, etc.