Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Jeff in MARGATE CITY, NJ recently purchased a custom loom about 1 hour ago
Joe in Ronkonkoma, NY recently purchased a custom loom about 22 hours ago
Timothy in Clifton springs, NY recently purchased a custom loom!
Peter in Belleair , FL recently purchased a custom loom!
Francis in Tampa, FL recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

I found rattlesnake cables by accident. Sent them an inquiry and got a phone call literally within a half hour from Hank. He spent time on the phone with me while I explained the project I wanted to complete. The cable loom that he made for me is absolutely awesome. The quality is well above what I expected. It really solves a lot of problems I had with all my cables being loose. I'm so surprised at how much better The quality of my tone got. I didn't really believe that cables could make that much difference. But it sounds much better with these rattlesnake cables. I'm a customer for life. I also purchased a snake head guitar cable. Which I'm using for my electric and my acoustic rig. Just love the quality. Again I can't state enough how much it made a difference in my sound. I definitely got more dynamic range, especially from my acoustic guitar. Thanks again Hank. Really appreciate your time your craftsmanship and the quality of your product.

Service / Experience

Flawless. Answered all my questions immediately on email. Phone called me within a half hour of my message on their website. The customer service really sets them apart.

Items Purchased

10 foot snake head guitar cable in blue 20 foot XLR loom. Three cables to use through my effects loop and input of my amp.

- Christopher G - 11/11/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

Jimmy Drakoulias
2/15/2022
Very happy with my Rattlesnake cable. It looks & sounds great. It seems durable yet lightweight.

Doomed Guitar
5/4/2021
So GOOOD!! I purchased a 20 foot seafoam gold end beginning of lockdown, and the tonal improvement was literally WIDE EYED WOW! Love the heavy duty, and wayyy quieter (like microphonically much quieter than a fatsoflex even and those were my live "quiet" cord standard). So,during live stage (lour volume) use, I was using a big name $$$ cable. The Rattlesnake Seafoam Snake Head gold ends direct to Mesa Mark 4 (a noisy higher gain amp) dethroned that. Really big difference. Quieter and just overall clearer and better sounding, straight to amp, secret weapon! So I decided to do my whole pedalboard in Mean Green gold ends. The improvement again, in clarity and just bigger overall sound, hard to describe. So much worth the $$$ that I'm measuring out all my fx cables, dozen or so amp sends from my board and any other signal cables flowing through my rig. Mean Green of course. *I'd like to mentions, the turnaround time, was ONE DAY from order to ship!!! NO himmmhawwing or excuses. I emailed an order for 10 custom cables Thursday. An hour or so later Hank had already helped me further refine my order for my board exactly, and it was completed and shipped Friday. Hank also made me a personalized thank you video. Model business. Perfect service. The cables are SO much better than my hodgepodge, spaghetti bowl of mixed "quality brands I won't name. No need. They're all getting sold and like I said, a dozen amp or more cables from board (10-20 footers there), some fx cables, rack cables and some others are on the list to order now. I'd absolutely recommend these wires to anyone looking to upgrade their guitar signal chain. Without hesitation and without buying into internet snakeoil, BUY a Rattlesnake guitar cable and see for starters HOW much better they sound. SO good!! THOUGHTS ABOUT OUR SERVICE: Amazing. Top notch!! I'll also give a shout in facebook and ig! WHAT WAS PURCHASED: 20' Standard in Retro Sea Foam with Neutrik Right Angle Gold to Neutrik Straight Gold Snake heads Pedalboard order: 10 cables, 5 different sizes

Jimmy Drakoulias
2/15/2022
Very happy with my Rattlesnake cable. It looks & sounds great. It seems durable yet lightweight.

Clayton Edwards
8/24/2020
I????????Love????????Rattlesnake????????Cables???????? Great cables made by even better people! As a working/touring bassist my cables are put through the ringer & my Rattlesnakes have NEVER let me down!!! They are built like tanks, sound great & last forever. Not only that but their customer service can’t be beat. If you’re in the market for a custom made, top quality cable that won’t let you down for years to come, then hit up Hank at Rattlesnake Cables!