Save 20% during our Easter Sale

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Jeff in Fort Collins, CO recently purchased a custom loom!
Abel in Marthasville, MO recently purchased a custom loom!
Gordon in Logan, UT recently purchased a custom loom!
Thomas in Spartanburg, SC recently purchased a custom loom!
Trevor in Dripping Springs, TX recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

I've been lead guitar the last 10 years for Monica Robins, a kickass singer in Cleveland, Ohio. I use mainly two pedalboard rigs; a Friedman 1317 board for typical venues and a Friedman 1520 board for larger stadium venues. Using Mogami cables and zip ties, I put together homemade 4 cable snakes of various lengths. I always thought there was something better out there. Then I found Rattlesnake Cable Company, and just love their products. I ordered a 12 ft loom along with a 12 ft snakehead guitar cable for my 1317 board, and a 20 ft loom & a 15 ft snakehead guitar cable for my 1520 rig. Within 10 minutes of placing my order, Hank called me and went over specs & recommendations. I was blown away by that kind of response and he really knows his stuff, helping me put together these two rigs. Within a day my order shipped and when I received them, the packaging was not only done well, it was very attractive as the looms and guitar cables were each in their own Rattlesnake Cabe canvas bags. There were all sort of nice promotional items as well. I connected both looms and cables to both rigs and fired them up. Not only are the weave colors attractive, but the cables are super clean and quiet. This will make setup and teardown a lot quicker and easier. I am so glad I found this company. Rattlesnake Cable Company stickers are now on the front of both pedalboards!

Service / Experience

Just phenomenal. This was the best customer experience I've ever had in any industry!

Items Purchased

12 foot Loom, 12 Foot Snake head guitar cable, 20 foot Loom, 15 foot Snake head guitar cable.

- Sid S - 09/06/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

Eric Bice
6/12/2021
Thank you so much! Blown away by this companies customer service, the personalized video to inform me of shipping and thanking me for the purchase! You’ve gained a loyal customer here! Thanks guys!

Mark Miller
4/8/2025
Have used my new Rattlesnake instrument cable on a half dozen gigs now. Excellent cable. Like the colors that the team at Rattlesnake cable company put together as well. I do have ( in my opinion) a quieter and stronger signal path from my basses to my Aguilar rig. I will be purchasing more soon.... Read

Eric H
6/25/2021
Always a smooth transaction. I've made several purchases from Rattlesnake Cables and each time has been an easy purchase and quick delivery. The priducts are top quality and unique. Every delivery is beautifully packaged with some bonus materials. I enjoy receiving my Rattlesnake orders and... Read