A nice sale on our Purple Weave Cables!

DAYS 0

HRS 0

MINS 0

SECS 0

For a very limited time!

Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Richard in Harker Heights, TX recently purchased a custom loom about 5 hours ago
Aaron in Powell, TN recently purchased a custom loom about 10 hours ago
Mike in Minneapolis, MN recently purchased a custom loom about 11 hours ago
Ben in Stokesdale, NC recently purchased a custom loom!
Jeff in Fort Collins, CO recently purchased a custom loom!

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

To say that I was blown away is an understatement. Everything from the packaging to what comes in the box and the quality of the product is above my expectations. I will be ordering all of my cables from Rattlesnake Cable Company from here on out.

Service / Experience

Customer service was stellar. I sent a quote for a custom piece and Hank called me and asked a few questions and within minutes I had a diagram and a quote emailed to me and he made it super easy to get what I needed.

Items Purchased

I purchased a 20 foot loom with a send, return, and amp to run from a pedalboard to my amp and the effects loop

- Will C - 07/31/2025

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

James Gayler
9/3/2020
I bought myself several cables for instrument and speaker use, and they so impressed me that I bought one for each member of my band (except drums). They are very well constructed, no noise, no tangling, nice colours, well-packaged. I have bought several more since then and plan to buy more in the... Read

Frank Mattioli
2/5/2025
Fabulous cables essential splitter for Ric o sound ,great company,great products!Rock on Rattlesnake!

Jeff Engelbert
2/5/2021
I've been a professional musician since the age of 19 (66 now). I've used every cable you can name. Mogami, D'Addario, Asterope, Armour Gold, ProCo, George L's, Lava and probably some I forgot. Ironically after seeing and hearing a great deal of buzz about Rattlesnake Cables I was in a music store in Boise, Idaho about 2 years ago and on a rack were some Rattlesnake Cables. I thought what the heck I would give it a try. When I got home I compared it to my Armour Gold, D'Addario American Stage and my Lava cable. No contest. The Rattlesnake cable was more balanced and had better cleaner more articulate mids, highs, and low frequency than all of the cables I was using. I also like the fact that the outside material is durable but not stiff. I now have at least 6 guitar cables in a variety of colors (I dig the Black Widow and Purple the most) and probably 18 patch cables of different lengths. The patch cables are now on my full size pedalboard, my alternate pedalboard, and my acoustic pedalboard. I'm done chasing the best sound for my guitar rigs I know I found it. THOUGHTS ABOUT THE SERVICE FROM Rattlesnake Cables: Hank and his team are terrific. They know it's a competitive world out there and there are so many choices in purchasing guitar cables and patch cables. Their Customer Service is 2nd to none. Always on time and most of the time exceed my expectations. I'm waiting for a curly cable throwback to the 60's, those were some of the first cables I ever used as a kid.

Frank Mattioli
2/5/2025
Fabulous cables essential splitter for Ric o sound ,great company,great products!Rock on Rattlesnake!