Free US / Domestic Shipping On Orders Over $145!

Custom Cable Loom.

Gordon in Logan, UT recently purchased a custom loom about 7 hours ago
Thomas in Spartanburg, SC recently purchased a custom loom about 11 hours ago
Trevor in Dripping Springs, TX recently purchased a custom loom about 14 hours ago
Dale in Eagle, ID recently purchased a custom loom about 15 hours ago
Jeff in MARGATE CITY, NJ recently purchased a custom loom about 20 hours ago

We are now offering a custom cable loom service. Being asked many times if we make looms, which we have unofficially have been building cable looms for guitar players over the last couple of years. Cable looms are a great solution where you need to run 3 to 4 cables back to the amp, such as the effects loop and main signal cable. By consolidating them in one loom, your tear-down and setup are much faster than individually uncoiling those cables.

Our cable looms use a wider diameter weave to accept up to 4 non-weaved (bare) cables. We use a tie-down system internally and then finish the weave with our attractive 2.75" thick piece of velcro with our custom riveted leatherette badges. This system will allow you to make adjustments down the road and is very versatile.

Since each loom system is so custom, we are providing this as a "product" here; you will need to submit a custom cable request to move forward since there will be some back and forth on your requirements.

Information we will need:

1. How many cables are you needing?
2. What are the lengths for the cable set?
3. What are the plug configurations for all cables.
4. What are the break-out points? - Distance the loom stops at the pedalboard end AND the break-out point on the amp side.

How much does this cost?

The pricing will be based on the cables needed within the loom and there is a $35-$45 loom fee.

Cable Loom Build Request Form

Your Name

Phone

How many cables in the loom?

How long are the cables?

Plug configurations? Straight to Straight? Straight to Right Angle?

Plug material? Default Nickel? Upgraded Gold? XLR Black Shells, etc?

Breakout points? Inches of exposed cable. Note: Minimum is 12"

Loom Color - Black, Snake Weave, and Red are always in stock.

How do you want to identify the cables? Here are some simple options - but we can expand or combine. If you need something custom, include it in the notes below.

Would you like to talk about an optional 4x4 junction box as well? Watch Video about our 4x4 Junction Box
Yes No

Additional notes about this build?

What Musicians Are Saying About Their Custom Looms

We’ve built hundreds of custom looms tailored to each player’s unique rig — and the feedback speaks for itself. Here’s what fellow musicians are saying about their experience, from the build quality and tone to how much easier setup and teardown has become. If you're on the fence, see how real players are using their custom loom on stage, in the studio, and on the road.

I purchased a 3 cable loom from Rattlesnake Cable Company so that I could setup a 4 cable system from my pedalboard to my amp. Rattlesnake has made it an ease to do my setup. Very pleased with the results!

Service / Experience

Hank took the timeout to contact me to make sure that all the measurements would workout for the setup I was looking for. Great service!!!

Items Purchased

Custom Cable Loom

- Nelson C - 03/26/2026

How long will the design phase take?

Typically, the process can take a few minutes, but it's largely dependent on you getting us the details for the loom. Once we get the information, we will draft a loom diagram quickly with a link to the purchase.

How long will the build take?

We pride ourselves on building our cables quickly and getting them into your hands. Depending on the complexity of your loom, it may take 1-3 days to ship. Oftentimes, we ship on the same day!

What kind of cables can be in the loom?

We offer a wide variety of cables that can be included in your loom. We can even include cables that are not listed on the site. Most loom builds use standard unbalanced/mono cables, but we can add power, TRS, XLR, MIDI, CAT5/EtherCon, etc.

Are there length limitations?

The length of the custom cable loom is based on your requirements. We've made very long looms for professional-level stage set up to very manageable rig lengths for the home studio, etc.

What happens if I need to make a change/adjustment to the loom in the future?

We don't like the shrink tube method of sealing up the loom. All sorts of issues make it difficult to make adjustments. We use a Velcro/Zip Tie method, allowing you to make adjustments if needed.

How to identify the cables?

We can do a variety of methods, from lasered leatherette badges to colored shrink tubes to different color cable PVCs.

What loom weave is available?

We have a variety of loom weaves in stock and have a few in rotation. Black, Snake Weave and Red are always available.

How important are the breakouts?

The point of the breakouts is to easily reach your jacks WHILE not straining the plugs and jacks. It's always better to go long vs. short.

Reviews on Google

Jeffrey Bell
1/18/2021
Great Cables and even greater customer service.

PAUL KOMSIC
9/3/2021
Love these cables! From the main leads, to speaker cables, to patch cables. They look just as awesome as they sound!

Kedi
1/19/2021
GET A RATTLESNAKE! THEY DON’T BITE! After years of getting what I considered some of the best guitars and amps I realized that what I had in the way of cables was, well basically junk. Luckily I discovered Rattlesnake Cables. In addition to being a visual treat, colors and patterns, the great “snakehead “ concept to protect your guitar finish, the cables provided a solid, stable connection. Gone were the snaps and crackles of thin, poorly soldered connections and loose jacks. Acoustic, electric, tube amp and solid state all sounded better to me and provided confidence in my equipment. I replace my head to cab cable with a Rattlesnake cable made specifically for that application, again no more concerns about connections. I am working on replacing pedalboard jumpers with Rattlesnake connections. Multiple lengths available to solve board design issues. These folks are nice to work with. Packaging is well though out, a nice cable tie include, a cable bag and cool sticker. The hand written thank you note on a small pad, to me, exemplifies their commitment to customer service. It’s a small American company that does things right. Cool T-shirts too!

Jeffrey Bell
1/18/2021
Great Cables and even greater customer service.

PAUL KOMSIC
9/3/2021
Love these cables! From the main leads, to speaker cables, to patch cables. They look just as awesome as they sound!