Free US / Domestic Shipping On Orders Over $145!

I'm not a fan of Y-Cables. They have a tendency to fail, and you are stuck with the length you get. We get asked about Y-Cables often, and I always recommend a Mono to Dual Mono Splitter

With a Mono to Dual Mono Splitter, you have maximum durability at the Y connection - often used as a guitar cord splitter. It will hold up, where a Y will slowly start to get stressed. Additionally, you have the flexibility. You can put long Mono Cables, or use Patch Cables, you're not stuck - and since application requirements often change as you change, it's nice to have options

Our splitter uses our powder coated / laser engraved enclosure and use quality Neutrik Mono Jacks.

3x Neutrik Mono Jacks
22 AWG wires
Laser etched enclosure
3.72" x 1.55" x 1.27" enclosure
SKU: SKU-CFBB5C93

Q: Why don't you sell Y cables?

Answer

Y cables, by design, cannot handle heavy strain, and the probability of failure is high. That's the number one complaint. The second issue is that you're stuck with whatever length the Y cable is set. As you requirements change, you may need shorter cables from the junction, or a longer cable for the primary TRS or Mono cable. With a TRS to Dual Mono Splitter or Mono to Dual Mono Splitter, you have a solid connection for the junction. You have the flexibility to swap out cables down the road.

Q: What cables would I need to connect to the Mono to Dual Mono Splitter?

Answer

You will need 3x Mono instrument cables - either patch cables or instrument cables (depending on the lengths).

Ken R. - I received my second order in fast time. Quality product and packaged well.
Read More

Rodney C. - Great cables. I just bought my 2nd and 3rd. I purchased my first Rattlesnake a few years ago, and as my Monster Cables started to go out, I have been replacing them with Rattlesnake. Nothing says rock n roll more than a '76 Thunderbird, a '77...
Read More

Bert H. - Searching for quality TRS cables and patch cables for both my Son and me, I stumbled upon Rattlesnake Cable Company (RCC). After reaching out to Hank, he went above and beyond to make sure I had the correct setup for my Rickenbacker 77'...
Read More

Charles G. - So impressed and proud to have chosen this company, the customer service is great, fast shipping and the product is actually beautiful. I have so much faith in the durability and quality of the cables and they also look incredible - encourages me to...
Read More

Lucian P. - RaTTLeSnaKE CaBLeS RoCK!
Read More

David Q. - Received the mono to dual mono splitter. I'm impressed with the quality of this gadget. Customer service is excellent.
Read More

Sergio C. - The products are great quality and nice design, what's stood out to me was the excellent customer service. I appreciated the personal video from rattlesnake
Read More

Brandon W. - The Mono to Dual Mono Splitter works exactly as I intended, taking a mono signal from an electric kalimba and making it "stereo" using a TRS Y cable and running through my stereo outboard effects patchbay. Works like a charm and sounds great with no...
Read More

Mono to Dual Mono Splitter.

Name: Mono to Dual Mono Splitter
Brand: Rattlesnake Cable Company
SKU: SKU-CFBB5C93
Price: 42.99 USD
Availability: InStock
Rating: 10 (18 reviews)

18 Reviews

$42.99

Free domestic shipping

Add items to your cart to unlock

threshold $145

Free shipping based on cart value after discounts

How we ship

Cables and products ship in sturdy cardboard. Single shirts go out in polymailers. We take pride in our quick shipping and quality packing!

Read our philosophy →

Secured & trusted

PayPal Visa Mastercard Amex

SSL secured via Let's Encrypt

Processed securely by Stripe & PayPal — PayPal also accepts credit cards at checkout

What Ken R. Said...

Testimonial:

I received my second order in fast time. Quality product and packaged well.

Thoughts about our Service:

Great

What was purchased:

10 foot red TRS cable and a Mono to Dual Mono splitter Box for a different application.

What Rodney C. Said...

Testimonial:

Great cables. I just bought my 2nd and 3rd. I purchased my first Rattlesnake a few years ago, and as my Monster Cables started to go out, I have been replacing them with Rattlesnake. Nothing says rock n roll more than a '76 Thunderbird, a '77 Precision, and a '77 Jazz through a couple of Ampegs. All connected with Rattlesnake cables.

Thoughts about our Service:

Customer service was first-rate. Notifications of every step of the process, from receipt of order to manufacturing, up through delivery. Thanks, Hank!

What was purchased:

10' Snake head, 20' instrument, both in snake weave, and a single to dual mono splitter -built like a tank.

What Bert H. Said...

Testimonial:

Searching for quality TRS cables and patch cables for both my Son and me, I stumbled upon Rattlesnake Cable Company (RCC). After reaching out to Hank, he went above and beyond to make sure I had the correct setup for my Rickenbacker 77' Rick-O-Sound... The quality of the cables and combiners is unmatched by anything I've purchased in the past. I don't see myself ever buying cables from another company.

Thoughts about our Service:

My customer service experience was top level. Not only did I get one on one customer service, but I was also personally contacted by RCC to ensure my expectations were met.

What was purchased:

TRS Dual Mono Splitter
Mono to Dual Mono Splitter
15' TRS Cable
Patch Cables
15' Standard

What Charles G. Said...

Testimonial:

So impressed and proud to have chosen this company, the customer service is great, fast shipping and the product is actually beautiful. I have so much faith in the durability and quality of the cables and they also look incredible - encourages me to take care of them and inspires me to play. I also got the mono to dual mono box which is perfect. It stays on my board, built like a tank, and far more confident in this than a Y splitter cable for sure! Keep doing exactly what you’re doing guys

Thoughts about our Service:

How every company should be

What was purchased:

Mono to dual mono splitter, two patch cables and 2 clean cables

What Lucian P. Said...

Testimonial:

RaTTLeSnaKE CaBLeS RoCK!

Thoughts about our Service:

The fastest shipping I have ever experienced, and it was free! I got my cable and splitter box in a couple days. Next day shipping from some places isn't even that fast.

What was purchased:

20' Standard in Snake Weave Cable and a Mono to Dual Mono Splitter!

What David Q. Said...

Testimonial:

Received the mono to dual mono splitter. I'm impressed with the quality of this gadget. Customer service is excellent.

Thoughts about our Service:

Excellent

What was purchased:

Mono to dual mono splitter

What Sergio C. Said...

Testimonial:

The products are great quality and nice design, what's stood out to me was the excellent customer service. I appreciated the personal video from rattlesnake

Thoughts about our Service:

Another top level. I've never experienced customer service as this one.

What was purchased:

Mono splitter

What Brandon W. Said...

Testimonial:

The Mono to Dual Mono Splitter works exactly as I intended, taking a mono signal from an electric kalimba and making it "stereo" using a TRS Y cable and running through my stereo outboard effects patchbay. Works like a charm and sounds great with no signal loss whatsoever.

Thoughts about our Service:

Great! Would recommend to anyone looking for quality cables or splitters.

What was purchased:

Mono to Dual Mono Splitter

Join the CABLE CREW for new videos, discount codes, and more! JOIN THE CABLE CREW

Looking for a custom cable build?

Are you looking for something custom? A set of specific-length patch cables? Or a longer or shorter instrument cable? Maybe you're looking for a limited weave we offered in the past but is no longer available. Shoot us a Custom Build Request, and we'll see what we can do to help!

Submit Custom Build Request

Family-Owned Business

Rattlesnake Cable Company started with a simple idea by me - Hank. It quickly encapsulated my entire family, from my kids to my wife, Amy. Now, Amy and I are 100% committed to the success of the business and love that it has grown into a fantastic team moving forward.

We Are Musicians

We are musicians. What does that mean? We know what it feels like when gear fails on stage. We hate that feeling, and we think about that with every build. As musicians, we also know how hard the road can be on gear and focus on making it stand the abuse.

Customer Service

We take customer service very seriously around here. We really appreciate ALL of our customers, and we want every aspect of your buying experience to be a great one. We ensure the buying experience, communication throughout the process, and final delivery of the product are perfect!

Quick Shipping

We understand after placing an order, the excitement starts - and we want to make sure you get your order quickly. From day one, we've pushed to get orders out as quickly as possible. Usually, orders are shipped the next day!

Lifetime Warranty

We will absolutely take care of you if you run into any issues with your cable. We do our best to prevent issues and understand life on stages and on the road can be hard on the cables. We've been there, and we'll definitely treat you right if you have any issues.

U.S. Milled Custom Cable

We take great pride that our custom instrument, XLR, and speaker cables are milled in the United States. All of our milled cables are built to our specifications here in the states and then soldered by hand in Missoula, Montana, by our great team!

Reviews on Google

Ken Anderson
11/18/2020
Hank has perfected the guitar cable. I've tried many different ones over the years, and have found none that carry a true tone like Rattlesnakes do! I have replaced all my cables (guitar and pedalboard), and have gotten comments from my bandmates about how much more umph my sound has. Cannot say... Read