What our customers are saying
Thoughts about our service
What was purchased
READ ANOTHER TESTIMONIAL
See what people are saying about Rattlesnake! Over 2200 testimonials and growing!
Free US / Domestic Shipping On Orders Over $145!
What Is Rick-O-Sound? And what do you need?
What is the Rickenbacker® Rick-o-Sound (Ricko sound)?
On the Deluxe Rickenbacker® models, they introduced the Rick-O-Sound circuit in their instruments. The Rick-O-Sound separates the two pick-ups (bridge and neck) into separate, independent lines that require a TRS (aka Balanced or Stereo) cable. You can then use these individual lines and send them to specific amps, pedal setups, etc., via our TRS to Dual Mono Splitter. This split signal handling is managed via a separate output jack but is not required to be used.
What is the benefit of using the Rick-O-Sound?
By separating your pick-ups, you can experiment with a variety of tones. For example, you could route the neck pick-up to a bass amp with the lows on bass, and the bridge signal could be routed to a guitar amp. Going with the middle position, you would blend the two amps and split them. Similarly, you could send the bridge pick-up to an effect (distortion, fuzz, etc.), and the result is only "on" when you select the bridge pick-up. Routing options to mixing console or front-of-house board could be interesting as well.
Why do Rickenbackers® have 2 outputs?
This question is asked often, and this feature is underused but is a fantastic option for these instruments. The two output jacks included a "Standard" and "Rick-O-Sound." The Standard output is a typical mono output, and when in use, the pick-up configuration is as you would expect. Both pick-up signals are routed through a single line. The "Rick-O-Sound" output jack requires a TRS/Balanced/Stereo instrument cable to work properly, where the TIP is the neck pick-up, and the RING is the bridge pick-up. You will hear the neck pick-up only if a standard mono/unbalanced cable is used.
Who uses Rick-O-Sound?
Some of the most notable users of the Rick-O-Sound would be Geddy Lee of Rush and Chris Squire of Yes!
What gear do I need to use the Rick-O-Sound?
For the most flexibility, we recommend using a splitter to manage the signals. We offer a TRS to Dual Mono Splitter, which many Rickenbacker® users are using. The benefit of using a splitter vs. a TRS Y-Cable is options. You can adjust your TRS cable lengths and mono cables with a splitter. You’re not locked in as with Y-cables. The TRS to Dual Mono Splitter will separate the Tip and Ring signals into two mono signals that can be routed to a pedalboard with patch cables or amps with long-run instrument cables.
Of course, you will need a quality TRS cable going from the Rickenbacker® to the TRS to Dual Mono Splitter, and that should be it!
My personal experience
So, I wanted to learn about this personally. I reached out to a good friend Chris Knutson who owns a Rickenbacker® 4001 that dates back to March 1992. Chris used this bass in the killer band International Playboys so this bass has some miles on it.
I used our TRS to Dual Mono Splitter and TRS cable and split the neck and bass pick-ups to 2 separate channels on my Matchless HC30 head where the neck goes into Channel 1, and the Bridge goes to Channel 2. To create some variety, I adjusted Channel 1 to have a clean, rich tone, and it sounded great for a standard bass setup. Channel 2, I increased the treble and raised channel volume, so it was getting a great gravely/medium-grit tone for the bridge.
Switching between the two via pick-up selector was great, but the combination (middle position) sounded amazing. This setup clears the lows and adds top-end break-up. I loved it.
The Most Detailed Rick-O-Sound Walkthrough You'll Find
If you’ve ever wanted a clear explanation of how Rick-O-Sound works, this is the video to watch. We break down everything you need to know, from what the stereo output on your Rickenbacker is actually doing, to how to set up your rig with our splitter cable for true dual-amp operation.
This is one of the most in-depth resources available on the topic. Whether you're just exploring the feature or looking to dial in a serious stereo setup, the walkthrough below will guide you through every step.
Below is a listing of our Recent Articles
Fractal Audio Cable Essentials: Humbuster™ Noise Reduction and AM4 Insert Summing
Fractal Audio Cables Explained: Humbuster™ vs AM4 Summing Insert Cables Modern Fractal rigs are capable of astonishing tone, clarity, and flexibility. But even the most advanced processor can be held back by improper cabling. Noise, ground loops, signal loss, and routing limitations almost always trace back to how devices are connected. Two cable types in particular often cause confusion for players running Fractal Audio systems: the Fractal Humbuster™ cable and the Fractal AM4...
Your Rick-O-Sound Not Working?
Here at Rattlesnake Cable Company, we field many calls and emails about the Rickenbacker® Rick-O-Sound feature. Usually, these calls are all related to the Rick-O-Sound (or Ric-O-Sound) functionality not behaving as expected. Over the years, I started to notice a trend in relation to these calls, and wanted to basically create a checklist of reasons why your Rick-O-Sound is not working correctly. Some are obvious, but I'm adding them since I do get calls for this. So here are seven reasons...
Custom Stage Cable Looms
What exactly is a cable loom? What is a Cable Loom? First, we need to address the fact that cable looms are sometimes mentioned with different terminologies. A cable loom is when you have multiple signals wires/cables wrapped in a single weave or 'loom'. Sometimes cable looms are referred to as Cable Snakes, Pedalboard Snake, or Pedalboard Cable Snake. Typically, these are used for Pedalboard Cable Management, from board to amp, but can refer to many other applications, such as IEM, XLR,...
TRS cables vs. TS Cables. What's the difference?
A question this often asked is, “What is the difference between a TRS and a TS cable?” This is a frequent question and has a lot of information associated with it. We wanted to provide some answers to some of the most common questions surrounding this simple yet complex topic. We thought the best approach was to break down the various questions we get since there are several angles to the answer. TRS Cables vs TS Cables The first fundamental to understand is that the underlying cables are...
What is the perfect guitar cable length?
What is the perfect guitar cable length? At Rattlesnake Cable Company, we often get asked, "what is the perfect guitar cable length?" That is a difficult question to answer without knowing some of the critical variables and applications for the musician. But before we get started, let's start with some of the common questions. Are long guitar cables bad? Yes and no. Typically, extremely long guitar cables can be a problem due to cable capacitance. The longer the run, the more capacitance can be...Testimonial Images
Reviews on Google
9/1/2020
I bought a guitar cable several years ago. The transaction was easy, & shipping was prompt. The cable is superlative. It's 15 feet, but I can't detect any tone loss. It is heavy, and built for far more work than I'll ever put it through. I could see this thing touring for years and not breaking... Read
12/23/2022
I agree with what everyone else has said about quality and packaging. But I can’t say enough about their Customer service, which is superior. I made a mistake in an order that had already shipped and Hank made the arrangements for the return and made it easy to get what I actually needed. Thanks... Read
9/17/2020
I purchased a Blue Bass cable with a right angle from Rattlesnake Cable Company a few years ago. Very well made product and was delivered in a cloth bag with stickers. High Quality instrument cable! Two thumbs up!! I will definitely buy from them again :)
9/1/2020
I bought a guitar cable several years ago. The transaction was easy, & shipping was prompt. The cable is superlative. It's 15 feet, but I can't detect any tone loss. It is heavy, and built for far more work than I'll ever put it through. I could see this thing touring for years and not breaking down. Bonus: I let a friend use it for the bullwhip when he was Indiana Jones for Halloween, and nobody noticed it was a guitar cable. 10/10 recommend and will replace any other cable or patch that breaks down on me with Rattlesnake.
12/23/2022
I agree with what everyone else has said about quality and packaging. But I can’t say enough about their Customer service, which is superior. I made a mistake in an order that had already shipped and Hank made the arrangements for the return and made it easy to get what I actually needed. Thanks Hank!!
9/17/2020
I purchased a Blue Bass cable with a right angle from Rattlesnake Cable Company a few years ago. Very well made product and was delivered in a cloth bag with stickers. High Quality instrument cable! Two thumbs up!! I will definitely buy from them again :)
