What our customers are saying
Thoughts about our service
What was purchased
READ ANOTHER TESTIMONIAL
See what people are saying about Rattlesnake! Over 2000 testimonials and growing!
Are you having a hard time finding out what component is failing or broken in your pedal project? This is where an audio test probe can be extremely valuable and easy to isolate a problem.
The Rattlesnake Audio Probe is a great tool for you DIY effect builders and modders out there. It allows you to probe the circuit, establishing breakpoints that let you know what the circuit is doing audibly. Following breakpoints is a great way to identify bad components or where their circuit is failing.
You connect a cable from the amp's input to the 1/4" jack on the probe. Connect a cable from a guitar or signal generating device (could be a looper or instrument) into the pedal's input. Insert the black (ground) probe somewhere in the circuit's ground (usually a screw hole on the enclosure chassis), then touch the red probe to the component. I typically tend to start at the input, which should give you a clean, unaffected tone, then work down the trace until you identify a problem.
The probe is not meant for high voltage devices. The Audio Probe is designed to test simple 9V circuits like pedals.
Please check out the video below. This video shows how I used the Rattlesnake Audio Probe to diagnose a faulty IC in an old MXR Distortion+. The distortion was very "farty," clearly, something was wrong in the circuit. But where? By navigating the circuit, I was able to isolate at the IC. Once I determined that was the problem, I replaced the IC, and the MXR Distortion+ was back to sounding great!
Are you looking for something custom? A set of specific-length patch cables? Or a longer or shorter instrument cable? Maybe you're looking for a limited weave we offered in the past but is no longer available. Shoot us a Custom Build Request, and we'll see what we can do to help!
We will absolutely take care of you if you run into any issues with your cable. We do our best to prevent issues and understand life on stages and on the road can be hard on the cables. We've been there, and we'll definitely treat you right if you have any issues.
We take customer service very seriously around here. We really appreciate ALL of our customers, and we want every aspect of your buying experience to be a great one. We ensure the buying experience, communication throughout the process, and final delivery of the product are perfect!
Rattlesnake Cable Company started with a simple idea by me - Hank. It quickly encapsulated my entire family, from my kids to my wife, Amy. Now, Amy and I are 100% committed to the success of the business and love that it has grown into a fantastic team moving forward.
We take great pride that our custom instrument, XLR, and speaker cables are milled in the United States. All of our milled cables are built to our specifications here in the states and then soldered by hand in Missoula, Montana, by our great team!
We are musicians. What does that mean? We know what it feels like when gear fails on stage. We hate that feeling, and we think about that with every build. As musicians, we also know how hard the road can be on gear and focus on making it stand the abuse.
We understand after placing an order, the excitement starts - and we want to make sure you get your order quickly. From day one, we've pushed to get orders out as quickly as possible. Usually, orders are shipped the next day!
Check out some videos talking about Rattlesnake Cables - unboxing, demos, etc.
Leslie in Lake Stevens WA just made a purchase!
about 16 hours ago
Scott in Provo UT just made a purchase!
about 14 hours ago
Rick in Washington DC just submitted a custom build request!
about 3 hours ago
Manny in El Paso TX just submitted a custom loom request!
about 16 hours ago
David in Westchester OH just submitted a custom loom request!
about 3 hours ago
Justin in Pittsburgh PA just made a purchase!
about 1 hour ago
Robert in Augusta GA just made a purchase!
about 13 hours ago
Debra L in Kentwood MI just made a purchase!
about 6 hours ago
Drew in MILWAUKEE WI just made a purchase!
about 2 hours ago
Scott in Burbank CA just submitted a custom loom request!
about 13 hours ago